Fevicol Marine Adhesive

Where can I buy Fevicol Marine in Hyderabad?

EightxFour supplies Fevicol Marine across Hyderabad — request a quote and we'll confirm current availability and delivery timeline against your quantity. Send your list or BOQ for a priced quote; first response in under 15 minutes during business hours.

How much does Fevicol Marine cost in Hyderabad?

Fevicol Marine is currently ₹172.27 – ₹15614.11/pack, excl. GST. Rates move with the market — request a quote for today's price on your quantity; project quantities are priced as one order.

What does 'BWP grade' actually mean?

BWP stands for Boiling Water Proof — the highest water-resistance classification for wood adhesives, meaning the bond is engineered to withstand prolonged, even boiling, water exposure rather than just occasional dampness.

Is Fevicol Marine only for boats?

No — despite the name, it's used wherever wood meets water: outdoor furniture, kitchen and bathroom carcasses, window frames, and genuine marine applications alike.

Do I still need waterproof plywood if I use Fevicol Marine?

Yes. The adhesive protects the joint, but if the plywood itself isn't BWP/marine-grade, the wood can still be damaged by moisture even if the glue line holds. Pair Marine adhesive with marine-grade substrate for full protection.

How does it compare to Fevicol SH for a kitchen cabinet?

For dry interior cabinets, SH is sufficient and more economical. For anything near a sink, wet-prone kitchen base unit, or bathroom vanity, Marine is the safer, purpose-built choice.

How long should I wait before the piece gets wet?

Initial set is reached in about 4 hours, but allow the joint to cure fully before exposing it to sustained water contact for maximum durability.

What is the shelf life of Fevicol Marine, and how should I store it?

Store in a cool, dry place away from direct sunlight, with the lid tightly closed between uses — this preserves the adhesive's working consistency and waterproof performance. Check the manufacturing date on the pack, and use within roughly 2 years for best results.

Does Fevicol Marine resist fungus and mould, or just water?

Both. Beyond boiling-water resistance, it's formulated to resist fungal and bacterial growth, which matters in permanently damp joints where mould is often the real cause of long-term failure, not just water alone.

Is Fevicol Marine safe to use indoors?

Yes — used as directed, it's suitable for indoor workshop use. Avoid prolonged skin contact, ensure reasonable ventilation, and wash hands after use.

Can Fevicol Marine be used on outdoor furniture left in direct rain?

Yes, this is one of its core use cases — but for continuous outdoor exposure, also use weather-appropriate wood, finish the exposed surfaces well, and design joints to shed water rather than trap it.

Why did my 'waterproof' joint still fail?

The most common cause is pairing Marine adhesive with non-marine-grade plywood — the board itself absorbs water and swells even though the glue line holds. Insufficient clamping time or applying adhesive too thin can also weaken the bond.

Can I use Fevicol Marine for laminate and veneer pasting too?

Yes, it works for general wood-based bonding including laminates and veneers, but it's best reserved for pieces that genuinely need waterproof performance — for dry interior laminate work, Fevicol SH or HiPer is more economical.

How much Marine adhesive do I need for a sheet of plywood?

Coverage is approximately 34-38 sq. ft. per kg when applied to both surfaces — for a standard 8x4 ft plywood sheet (32 sq. ft.), budget roughly 1 kg per full-face bond, adjusting for panel size and overlap.

What thicknesses does Fevicol Marine come in?

Fevicol Marine is available in 60 kg, 50 kg, 30 kg, 20 kg, 10 kg, 5 kg, 2 kg, 1 kg, 500 gm.