Hyderabad price guide
Natural Veneer Price in Hyderabad
Natural veneer is a single species sliced off the log, so no two leaves are identical and matching a run is the work that the price pays for. It is the finish specified when the wall or the shutter is meant to look like real wood because it is real wood.
The ranges below are the natural and natural-smoke collections in the catalogue — the smoked and dyed leaves are still natural veneer, fumed for an even, deeper tone rather than reconstituted. Reconstituted and engineered ranges sit on the main veneer price page.
Rates where published are per leaf or per sq.ft excluding GST. A matched project quantity from one flitch is priced against the schedule, not the rate card.
Ranges and current rates
| Brand & range | Shades | Thickness | Sheet size | Rate |
|---|---|---|---|---|
| EightByFour — Natural Veneer e.g. Natural Veneer 01, Natural Veneer 02, Natural Veneer 03 | 135 | — | — | Request current price |
| EightByFour — Natural Smoke Veneer e.g. Natural Smoke Veneer 01, Natural Smoke Veneer 02, Natural Smoke Veneer 03 | 46 | — | — | Request current price |
Only natural and natural-smoke collections appear above. Rates, where shown, exclude GST and cover the collection. A matched run from a single flitch is a sourcing job quoted against the project.
Natural vs reconstituted vs engineered veneer
All three are real wood sliced thin. What separates them is whether the log or a process decided the grain — and that is the whole basis of the price gap.
| Type | What it is | Grain and repeatability | Relative cost | Where it belongs |
|---|---|---|---|---|
| Natural | A single species sliced straight off the log | Every leaf is different; matching across a run is a sourcing job | Highest | Feature walls, statement shutters, boardroom and reception joinery |
| Natural smoke / dyed | Natural veneer fumed or dyed for a deeper, even tone | Natural grain, controlled colour | High | Dark-wood looks — walnut, wenge, smoked oak — without the species cost |
| Reconstituted | Fast-growing wood dyed, re-glued into a block and re-sliced | Uniform, repeatable grain leaf to leaf | Mid | Large runs where every panel must match — hotels, retail, multi-flat projects |
| Engineered / recon teak | Reconstituted veneer engineered to imitate a specific premium species | Consistent 'teak' or 'oak' figure on demand | Mid | The teak look at a plannable price, where genuine Burma teak is out of budget |
Veneer is a finish, not a structure. Whatever leaf goes on the visible face, a balancing backer goes on the reverse or the panel will cup — the same rule as laminate.
Where each option belongs
Feature walls and shutters
Natural veneer on 18mm MR ply, book-matched or slip-matched across the panel run. This is where the leaf-to-leaf matching work is worth paying for and where it has to be agreed before slicing, not after.
Wardrobe and unit faces
Reconstituted or natural smoke veneer where a large area must read as one continuous piece. A natural species here means living with visible variation between doors.
Reception and boardroom joinery
Premium natural species — teak, walnut, oak — where the veneer is the reason the room looks expensive. Order the whole project's leaf area in one lot from one flitch.
Where a laminate is the better call
High-traffic horizontals, kitchen shutters that get wiped daily, and any budget-led run where matched natural leaves cannot be justified. A woodgrain laminate is more honest there than a thin natural veneer that wears through.
Buying for a whole project?
Send the full list — plywood, laminates, hardware, adhesive, edge banding — and it comes back as one itemised quotation with a single delivery schedule, instead of four vendor conversations you have to reconcile yourself.
Excel, PDF, a photo of a handwritten list, or a screenshot — whatever the list already exists as.
Quote these in the same order
Plywood
The substrate every veneer leaf is pressed onto — MR for dry areas, BWP below the counter. Quote both together.
Adhesive
Fevicol SH and Marine, sized to the veneered area and the substrate grade.
Laminates
Where a printed woodgrain at a fraction of the cost is the honest call for the surface.
Solid Surface / Corian
Seamless counter and vanity tops to sit alongside a veneered carcass.
Frequently asked questions
What is the price of natural veneer in Hyderabad?
Natural veneer is quoted by species and by matched area rather than off a single rate. The table above lists every natural range we source with its leaf size and, where published, its rate — send the panel schedule for a confirmed figure.
Is smoked veneer still natural veneer?
Yes. Smoked and fumed veneers are natural leaves treated with heat or ammonia to darken the tone evenly. The grain is untouched — it is not a reconstituted or printed product.
Can natural veneer be matched across a whole room?
Only if the leaf area is ordered together from one flitch. Once a flitch is used up the next one differs in figure and tone, so a room-wide run has to be sourced as a single lot up front.
How thick is natural veneer?
Decorative natural veneer is typically around 0.5mm. It is a finish layer pressed onto plywood or MDF, not a material used on its own.