Hyderabad price guide
Teak Veneer Price in Hyderabad
Teak veneer splits into two products at very different prices: genuine Burma teak sliced off the log, and engineered veneer processed to imitate teak figure. Both are real wood; only one carries the grain, the oil content and the cost of the species.
The table below covers the Burma teak collection alongside the reconstituted and exotic ranges that give a teak look for less. Leaf sizes and pattern counts are read live from the catalogue.
Genuine teak for a full project is a sourcing exercise — the matched leaf area has to come from one flitch. Send the schedule and it is priced against the job, not a rate card.
Ranges and current rates
| Brand & range | Shades | Thickness | Sheet size | Rate |
|---|---|---|---|---|
| EightByFour — Burma Teak Veneer e.g. Burma Teak Veneer 01, Burma Teak Veneer 02, Burma Teak Veneer 03 | 65 | — | — | Request current price |
Genuine Burma teak and engineered teak-look ranges are listed together above with their leaf size. Rates where shown exclude GST. A matched teak run is quoted against the project schedule.
Natural vs reconstituted vs engineered veneer
All three are real wood sliced thin. What separates them is whether the log or a process decided the grain — and that is the whole basis of the price gap.
| Type | What it is | Grain and repeatability | Relative cost | Where it belongs |
|---|---|---|---|---|
| Natural | A single species sliced straight off the log | Every leaf is different; matching across a run is a sourcing job | Highest | Feature walls, statement shutters, boardroom and reception joinery |
| Natural smoke / dyed | Natural veneer fumed or dyed for a deeper, even tone | Natural grain, controlled colour | High | Dark-wood looks — walnut, wenge, smoked oak — without the species cost |
| Reconstituted | Fast-growing wood dyed, re-glued into a block and re-sliced | Uniform, repeatable grain leaf to leaf | Mid | Large runs where every panel must match — hotels, retail, multi-flat projects |
| Engineered / recon teak | Reconstituted veneer engineered to imitate a specific premium species | Consistent 'teak' or 'oak' figure on demand | Mid | The teak look at a plannable price, where genuine Burma teak is out of budget |
Veneer is a finish, not a structure. Whatever leaf goes on the visible face, a balancing backer goes on the reverse or the panel will cup — the same rule as laminate.
Where each option belongs
Main door and entrance joinery
Genuine Burma teak, where the door is the first thing a visitor touches and the species is the point. Order the leaf area for the frame and shutter together.
Feature walls and headboards
Burma teak for a statement wall; engineered teak where the same warm figure has to run across a large area without visible flitch changes.
Full-flat teak theme
Engineered or reconstituted teak keeps a whole flat consistent at a plannable cost. Genuine teak across every room is a budget decision to make before the design, not after.
Where laminate is the better call
Kitchen shutters and any wiped-daily surface. A teak-finish laminate outlasts a 0.5mm natural leaf in that use and costs a fraction.
Buying for a whole project?
Send the full list — plywood, laminates, hardware, adhesive, edge banding — and it comes back as one itemised quotation with a single delivery schedule, instead of four vendor conversations you have to reconcile yourself.
Excel, PDF, a photo of a handwritten list, or a screenshot — whatever the list already exists as.
Quote these in the same order
Plywood
The substrate every veneer leaf is pressed onto — MR for dry areas, BWP below the counter. Quote both together.
Adhesive
Fevicol SH and Marine, sized to the veneered area and the substrate grade.
Laminates
Where a printed woodgrain at a fraction of the cost is the honest call for the surface.
Solid Surface / Corian
Seamless counter and vanity tops to sit alongside a veneered carcass.
Frequently asked questions
What is the price of teak veneer in Hyderabad?
Genuine Burma teak and engineered teak-look veneer are very different numbers. The table on this page lists both with leaf sizes; send the panel area and species preference for a confirmed rate.
What is the difference between natural teak and engineered teak veneer?
Natural teak is sliced from a teak log and carries the real grain and oil. Engineered teak is fast-growing wood dyed and re-assembled to imitate teak figure — consistent and cheaper, but not the species.
Is Burma teak veneer available in Hyderabad?
Yes, through our supply network rather than off the shelf. Genuine teak for a project is sourced as a matched lot from one flitch, so it is ordered against the schedule with lead time confirmed up front.
How do I match teak veneer across several doors?
Order the full leaf area for every door in one lot from a single flitch. Buying door by door means each one differs in figure and tone.